| Duegieditrice.it https://www.forum-duegieditrice.com/ |
|
| Disponibile firmware per Ecos 2 3.6.1 https://www.forum-duegieditrice.com/viewtopic.php?f=21&t=67664 |
Pagina 1 di 1 |
| Autore: | gianmodel [ sabato 22 dicembre 2012, 9:04 ] |
| Oggetto del messaggio: | Disponibile firmware per Ecos 2 3.6.1 |
Disponibile il nuovo firmware per la Ecos !!! Ecco il dettaglio General - ADD: RailCom Support for ECoSBoost. In combination with ECOSBoost, even Central Station Reloaded can use RailCom now (however disabled by default) - CHANGE: External Booster Control Timing changed to the original setting before version 3.4.0 - ADD: Added a "Hosenträger" icon, 2 aspects, Computerinterface 33 - ADD: Added a "Hosenträger" icon, 4 aspects, lefthand, Computerinterface 34 - ADD: Added a "Hosenträger" icon, 4 aspects, righthand, Computerinterface 35 - CHANGE: For routes, the symbol of the computer interface changed to 42 - ADD: Added a accessory symbol without real track output as dummy in routes. - ADD: Support for F22, F23 for locomotive control - CHANGE: in the Multicontrol screen, you can now change direction and speed on non-selected locomotives. (Only for ECoS 50200) - ADD: Shuttle train symbol shown also on Multicontrol screen - ADD: Using Multicontrol screen, you can enter the locomotive menu by clicking on the selected locomotive icon - CHANGE: M4/RailComPlus engines will automatically entered into locomotive favourites list #1 (like the manually entered locomotives) - BUGFIX: RailComPlus detection now works also with Tams-Decoders - BUGFIX: The text that displays when a new locomotive is detected via RailComPlus is now located on correct position. - ADD: NMRA manufacturer list updated - ADD: "Ok and next" key added to the keyboard when editing text of accessories and routes - BUGFIX: Motor-driven throttles will now follow movement also when operating in track control - ADD: you can now edit links in the track diagram - ADD: The IP device name can now be edited in the IP setup dialog. Will be published via DHCP - ADD: You can now ask the ECoSBoost to blink for identification. We added a a button for it in the menu - BUGFIX: No more crash when changing s88 modules from 8/16 without having any s88 module - BUGFIX: No more crash of ECoS when exiting the menu while DCC programing is still active - ADD: Shift key in the keyboard - CHANGE: Screen calibration now turns off the track power Track Layout: - ADD: Added a function symbol without track, computerinterface 18 - ADD: Added a function symbol with track, computerinterface 36 - ADD: Added a unidirectional "Start-Stop-Button", computerinterface 37 - ADD: Added a dummy symbol, 2 aspects, computerinterface 38 - ADD: Added a dummy symbol, 3 aspects, computerinterface 39 - ADD: Added a dummy symbol, 4 aspects, computerinterface 40 - ADD: Added a bidirectional "Start-Stop-Button", computerinterface 41 |
|
| Pagina 1 di 1 | Tutti gli orari sono UTC + 1 ora [ ora legale ] |
|
Duegi Editrice - Viale Francia, 7, 35020 Ponte S. Nicolò (PD). Italy - Tel. 049.711.363 - Fax 049.862.60.77 - duegi@duegieditrice.it - shop@duegieditrice.it |
|